UNPACKING YOUR TURNTABLE
1. Carefully remove the turntable and accessories from the box.
2. Place the turntable on a flat, level surface and carefully open the lid.
3. Remove the white protective Stylus Cover by gently pulling it away from
the TONEARM
(2)
as shown below.
4. Carefully remove the twist-tie from the TONEARM
(2)
.
5. Release the TONEARM LOCK
(3)
holding the TONEARM
(2
) to the
TONEARM REST
(4)
by gently pushing the TONEARM LOCK
(3)
to the
right.
•
NOTE
: Please do not discard the white protective stylus cover as it can
protect the stylus when the turntable is not in use or is being moved.
POWER
1. Plug the supplied AC 120V to DC 5V power adapter into the AC 120V~50Hz
to DC 5V INPUT
(13)
located on the rear of the turntable.
2. Insert the wall plug of the power adapter into an electrical wall outlet.
3. Turn the Turntable ON by turning the
POWER/VOLUME KNOB (8)
clockwise.
•
NOTE: You will hear a click when the knob is first turned to the right and
the POWER INDICATOR LIGHT
(9)
turns ON.
4. Turn the Turntable OFF by turning the
POWER/VOLUME KNOB (8)
counterclockwise until you hear the click which indicates the power is OFF
and the POWER INDICATOR LIGHT
(9)
turns OFF.
