Canyon Sanchal, Быстрое руководство, Страница: 3 / 58

contact pins and the charger as shown in the figure.
If the contacts are connected correctly, the watch will
«grip» to the charger via the built-in magnetic lock.
Charger requirements: 5V
Charging time: 2-5 hours depending on a source of
charge.
Disassembling: find little levers located on the
backside of the place where wristband is connected
to the watch body. Pull the levers to the center and
pull the wristband out.
Assembling:
put a part of the wristband to the watch
body applying the side with no lever. Press the lever
to the center and put this side into the watch body.
Release the lever and the wristband will fix under
pressure of internal spring.
Turning on: Hold your finger on the screen for a few
seconds until the device is turned on.
EN