Canyon CNE-SB01BB, Быстрое руководство

Страница: 4 / 48

Canyon Fit by scanning the QR code below, open
Canyon Fit app->press ”Setup”->”Pair device”->”
Start”-> choose your watch from pair device list
(SB01) -> press ”ADD DEVICE” and you will see
Device successfully connected. Use the application
to apply needed settings: turn on periodic heart rate
measurement, fill in your body parameters, select
apps that you want to receive notifications from, etc.
Scan this QR code to
download and install
the application Сanyon Fit:
Troubleshooting
EN
Problem Solution
Your
smartwatch
doesn’t turn
on
Make sure that it’s fully charged.
Then press and hold the round
button on the front side of the watch
body. If nothing helps, please contact
your shop of purchase for warranty
support.
Your
smartwatch
isn’t detected
by a
smartphone
Make sure that you’ve activated
Bluetooth, GPS, Location Services
with high presicion, WiFi on your
smartphone