manualshive.com logo in svg

CanyCom S25A, Руководство оператора

Поделиться
Скачать
CanyCom S25A Скачать руководство пользователя страница 3

Notice to Users and Maintenance Personnel

 • This machine can be very dangerous if the safety precautions in this manual 

and on the labels attached to this machine are not followed. Read and 
understand this manual and the safety labels on the machine thoroughly before 
using this machine. Always follow the instructions and safety precautions, or 
serious injury or death could result.

 • This machine should only be used for its intended purpose: hauling and 

dumping. Any other use could be dangerous.

 • This machine may not be operated on public road or what is considered to 

be public road. It is the sole responsibility of the operator to consult the local 
regulations.

 • Do not modify this machine, or do not operate this machine with the safety 

covers removed or open. A serious accident could result.

Thank you for purchasing this machine.
This manual provides information needed for safe and effective use of this machine to 
those who operate or maintain the machine. Make sure to read and understand the manual 
thoroughly before operating this product. Also make sure to read the separate operator's 
manual for the engine. 

 •  Store this manual in a safe, accessible place for easy reference.

Содержание S25A


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды