CanyCom MASAO CMX 2502 Скачать руководство пользователя

Страница: 38 / 95

-29-

Operation

• Do not make a sudden stop. Operator may be thrown off, or machine may skid

or tip over.

• Always park on a firm, level place. Never park on a potentially dangerous place.

• Do not park near combustibles.

Stopping

1. Gradually return drive pedal to slow down.
2. Take foot off drive pedal.

When Driving with Drive Pedal

• Drive pedal returns automatically to neutral

when released.

NOTE

5347M-0402-040E

Drive Lever

Neutral Position

1. Gradually return drive lever to nutral position

to slow down.

2. Release hand off drive lever.

When Driving with Drive Lever

• Do not hold drive lever and depress brake pedal at the same time. Or, do not

depress drive and brake pedals at the same time. HST may be damage.

5347M-0402-160E

Drive Pedal

Содержание MASAO CMX 2502
































































































Результаты поиска

Содержание MASAO CMX 2502

Отзывы:

Похожие инструкции для MASAO CMX 2502

Бренды по названию

Популярные бренды

CanyCom MASAO CMX 2502, Руководство оператора

Результаты поиска

Содержание MASAO CMX 2502

Отзывы:

Похожие инструкции для MASAO CMX 2502

Бренды по названию

Популярные бренды