-21-
Operation
4
5332M-0401-080E
Safety Pin
Adjusting Height (Rear Part)
1. Slide seat to the rear-most position.
2. Pull up seat and push safety pin toward
inside to hold seat lifted.
• Move seat and to check if the seat is locked
securely.
• Height at the rear can be adjusted in 4
levels.
• Seat switch bracket is mounted in the
heighest position when shipped from
factory.
NOTE
Adjusting Height (Front Part)
1. Pull up seat and push safety pin toward
inside to hold seat lift up.
Height of seat at front can be set in one of two positions.
• Height of seat at front is set at the high position when shipped from the factory.
• Seat switch bracket needs to be in the highest position when setting the front in
high position.
NOTE
5347M-0401-150E
Bolt
Front Hole
Seat hinge Bracket
2. Remove 2 bolts that mount seat hinge
bracket. This bracket holds the entire seat,
so make sure to hold seat when removing
bolts.
3. Turn around bracket and mount it to floor,
with bolts through front holes.
4. Pull back seat safety pin and lower seat.
