Controls and Components
-14-
2
10 Cutting Rotary Clutch . . . . .
Cutting rotary clutch lever is used to start or stop rotating
cutting rotary.
11 Tilt Lever . . . . . . . . . . . . . . . .
Tilt lever is used to adjust the angle of steering wheel.
12 Head Lamp Switch . . . . . . . .
Head lamp switch is used to turn on or off head lamp.
When umain switch is on, head lamp switch illuminates.
13 Tail Lamp Switch . . . . . . . . .
Tail lamp switch is used to turn on or off tail lamp. When
umain switch is on, head lamp switch illuminates.
14 Fuel Gauge . . . . . . . . . . . . . .
Fuel gauge indicates the amount of fuel in fuel tank.
15 Hour Meter . . . . . . . . . . . . . .
Hour meter indicates the cumulative total operating time of
the machine in 0.1 hour increments.
16 Cutting Deck Retractor . . . .
This switch retracts cutting deck to the travel (highest)
position. When this is lit, the height of cutting deck can be
adjusted with cutting height volume. When unlit, cutting
deck retracts to the travel position.
17 Cutting Height Knob . . . . . .
Cutting Height Knob sets the height of cutting deck. Its
function is disabled and cutting deck retracts to the travel
position when cutting deck retract switch is unlit.
18 Cutting Height Indicator . . .
Indicates the cutting height.
19 Cutting Deck Slide Switch . .
Translates cutting deck sideways.
(CMX253 Only)
Lever
Switch
