CanyCom CM1305 Скачать руководство пользователя страница 58

Страница: 58 / 59

10. TRANSPORTATION OF/WITH THIS VEHICLE

When loading and unloading the machine onto or from truck, follow the procedures below.

1. Prepare running boards with enough strength (durable to hold both machine and driver's weight), width (twice

width of tire width), length (more than three times as long as the truck loading body height), and abrasive sur-
face. Place the boards as shown below so that the boards firmly keep their positions even when the machine
rides on them.

2. Securely hook the running boards to truck so that there is no difference in height between the boards and the

truck's loading bed.

TRANSPORTATION OF/WITH THIS VEHICLE

– 53 –

• Do not allow any one to come near the machine, truck, and

running board while loading or unloading the machine.

• Do not turn on the running boards. The machine may drop

off the running boards.

• When moving up or down the running boards, drive the vehi-

cle slowly at low speed.

DANGER

When the machine is loading on the place between the truck

and the running board, beware of the machine's center of gravi-

ty because it may move suddenly.

CAUTION

More than 3 times as long as height

Height

Running boards

Содержание CM1305




























































Результаты поиска

Содержание CM1305

Отзывы:

Похожие инструкции для CM1305

Бренды по названию

Популярные бренды

CanyCom CM1305, Руководство оператора

Результаты поиска

Содержание CM1305

Отзывы:

Похожие инструкции для CM1305

Бренды по названию

Популярные бренды