10
11
Model No. 088-2214-2
ASSEMBLY ASSEMBLY
ASSEMBLY ASSEMBLY
Step 4
Requires
E, F, J, L, M, R, U, V, W
1. Attach the back frame (E) to the seat frame (F) by lining up the bolt
holes on the back frame (E) with the corresponding bolt holes on the
seat frame (F).
2. Using M6x45 combination bolt with washer (J), M6 washer (L) and
M6 nut (M), lightly tighten all bolts using the hex key (U) and the
wrench (V).
3. Tighten all bolts, then add M6 screw cover (W) as shown below.
Step 5
Requires
D, E, Q, Y
1. Follow the diagram to open the hook (Q). Connect the upper hanging bar (D) and
back frame (E) by using the hook (Q). Then tighten the hook (Q) by turning in a
counter-clockwise direction.
2. Place the cushion (Y) on the hanging swing seat as shown.
Q
Q
Y
F
E
F
R
R
J
E
L
M
W
NOTE:
Do not completely tighten.
