5
MODEL N0. 085-1562
LFT1224PST-A
IMPORTANT SAFETY INFORMATION AND PRECAUTION
I
The minimum distance between the brazier and the
cylinder is 30 in / 76.2 cm, which prevents the hosepipe
from falling between the cylinder and the brazier.
WARNING: The cylinder poses a risk of tripping.
nspect the hose assembly and burner prior to each use.
If there is evidence of excessive abrasion or wear, or if
the hose or burner is damaged, it must be replaced by
an appropriate part from the manufacturer.
Open the door and inspect the gas connections prior to
each use. Do not operate the unit if there is a gas leak.
Have the appliance inspected annually by a qualified service person.
The pressure regulator and hose assembly provided with the appliance must be used. The replace-
ment part must be the same as the part specified by the manufacturer.
For the assembly of LP-gas and leak checking, please refer to
“Gas Connection” on page 8 and
“Leak Test” on page 9.
Children and adults should be alerted to the hazards of high surface temperatures and should stay
away to avoid burns and prevent clothing ignition.
Young children and pets should be carefully supervised when they are in the area of the appliance.
Any guard or other protective device removed for servicing the appliance must be replaced prior
to operation.
Clothing or other flammable materials should not be hung from the appliance or placed on or near
the appliance.
Do not use this appliance if any part has been under water. Immediately call a service technician to
inspect the appliance and to replace any part of the control system which has been under water.
The LP-gas supply cylinder to be used must be constructed and marked in accordance with the specifi-
cations for LP-gas cylinders of the U.S. Department of Transportation (D.O.T.).
The cylinder supply system must be arranged for vapour withdrawal and the cylinder must include
a collar to protect the cylinder valve.
Use only 20 lb / 9 kg LP-gas cylinders.
Do not burn wood or any other materials in this appliance.
The appliance must be isolated from the gas supply piping system by closing its individual manual
shutoff valve during any pressure testing of the gas supply piping system at test pressure equal to or
less than 1/2 PSI (3.5 kPa).
Other cylinders may be acceptable for use with the appliance, provided they are compatible with
the appliance retention means and accompanied by illustration(s) depicting the cylinder mounted on
the appliance using the cylinder retention means and the point of contact between the cylinder and
the retention means.
Properly place the hose out of pathways where people may trip over it or
in areas where they may be subject to accidental damage.
The burner must be replaced prior to the appliance being put into
operation if it is clear that the burner is damaged. The replacement burner
must be the same as the part specified by the manufacturer.
To clean the appliance including the burner, please refer to “Storage and
Maintenance” on page 10.
Содержание 085-1562
Страница 6: ...6 EXPANDED VIEW ...
