Canvas 064-4021-4, Руководство по сборке

Страница: 49 / 104

WOODHAVEN 46” MEDIA FIREPLACE
49
ASSEMBLY TROUBLESHOOTING
PRODUCT TROUBLESHOOTING
CALL US;
WE CAN HELP
BEFORE RETURNING
YOUR PRODUCT
If you have questions regarding your product or require
warranty assistance, please call our customer service helpline.
TOLL-FREE:
1-888-670-6684
HAVING TROUBLE?
LET US HELP YOU!
PROBLEM POSSIBLE CAUSES SOLUTION
Cannot adjust the
temperature.
No heat, and no
way to power off
the unit. Only the
flame button works
properly.
Cannot turn off the
heater using the
heater button.
Operator did not follow
the operation steps.
Fireplace stopped
heating. There are
flames, but the
heater automatically
keeps shutting
itself off after a few
minutes.
Setting temperature
is under the room
temperature.
To deactivate Demo Mode, press and
hold the timer button for at least 10
seconds until the display shows “L4”.
Fireplace is in Demo
Mode.
Press the heater button repeatedly
until “OF” is shown in the control panel
display. This indicates the heater is OFF.
In this mode, the flames remain on but
the heater is not engaged. (See “Using
the heater control” in the OPERATION
section of this guide for more details.)
Set fireplace to a higher temperature or
“always on”.
Turn on the heater, then press the heater
button to enter temperature adjustment
mode. The LED display will start to flash.
Press the heater button repeatedly until
you reach your desired temperature
setting. (See “Using the heater control”
in the OPERATION section of this guide
for more details.)
NOTE: your heater thermostat default
temperature setting is 82°F (27.8°C).
If your room temperature is above
82°F (27.8°C), your heater will shut
itself off, unless you adjust your heater
thermostat to a higher temperature
setting.
N
ote that temperature around fireplace
may be a few degrees higher than other
areas in the room.