WALDON 60” LED MEDIA FIREPLACE
5
This product must be grounded. If it should
malfunction or break down, grounding provides
a path of least resistance for electric current and
reduces the risk of electric shock. This product
is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that
is properly installed and grounded in accordance
with all local codes and ordinances.
This heater is for use on 120 V circuits and has a
grounded plug. An adaptor is available from your
local electronics store or online supplier for connecting three-blade grounding type
plugs to two-slot receptacles. The green grounding lug extending from the adaptor
must be connected to a permanent ground such as a properly grounded outlet box.
The adaptor should not be used if a three-slot grounded receptacle is available.
NOTE: The use of grounded adaptors are banned in certain jurisdictions in Canada
due to safety concerns. Use of grounded adaptors on two-slot receptacles is unsafe
and should only be installed by a certified electrician. Check with local laws to ensure
compliance with legal requirements.
A
B
Grounding Pin
Grounding Pin
Adaptor
Metal Screw
Cover of Grounded Outlet Box
Cover of Grounded Outlet Box
9.
Use this heater only as described
in this manual. Any other use not
recommended by the manufacturer
may cause fire, electric shock,
or injury to persons.
10.
If possible, always unplug this
appliance when not in use.
11.
Do not operate any heater with
a damaged cord or plug or after
the heater malfunctions.
12.
Do not operate any heater if it has
been dropped or damaged in any
manner. Disconnect power at service
panel and have heater inspected by a
reputable electrician before reusing.
13.
Any repairs to this fireplace should
be carried out by a qualified service
person.
14.
Under no circumstances should this
fireplace be modified. Parts removed
for servicing must be replaced prior
to operating this fireplace again.
15.
This appliance, when installed,
must be electrically grounded in
accordance with local codes: with
the current CSA C22.2 Canadian
Electrical Code or follow the National
Electrical Code, ANSI/NFPA N0.70.
16.
The heater must not be located
immediately below a wall outlet/
receptacle.
17.
Do not slide insert on top of wood
to avoid scratching wood surface.
18.
Do not place any objects on top of
insert or air intake vents as this will
cause unit to overheat and can cause
a fire.
Содержание 064-4020-6
Страница 50: ......
Страница 100: ...MC D INSPIRATION CANADIENNE ...