10
11
MAINTENANCE
(The photos below are only intended as illustrations and may therefore differ slightly in appearance from your product.)
1. Replacing the dust bag: When the indicator shows red it is time to replace the dust bag (Fig. 1).
Open the front by pressing the button under the front cover (Fig. 2).
Remove the full dust bag from the compartment and fit a new one (Fig. 3).
2. Wash or replace the HEPA filter: unclip the grid in front of the outlet at the rear of the
machine and wash or replace the filter (Fig. 4).
3. Remove the motor protection filter (located in the compartment behind the dust bag) and
rinse it out once a year or as needed. Refit the filter when it has dried out. If the filter is
damaged it must be replaced (Fig. 5).
1.
4.
2.
3.
5.
Warning!
Unplug the power cord from the power socket before you carry out maintenance or replace any
parts. If the power cord is damaged it must be repaired by the manufacturer or a repair technician.
NOTE! For the correct replacement dust bags, see canvac.se and the product data sheet.
