22
© 2021, Elon Group AB. All rights reserved.
EN
CLEANING AND MAINTENANCE
• Switch off the unit and unplug the power cord before you start cleaning.
BOWL AND ULTRASONIC TRANSDUCER
• In areas with very hard water the ultrasonic transducer may become coated with
limescale (if so, clean the transducer inside the bowl using descaler, which is widely
available from supermarkets).
• Apply a small amount of the descaler to the surface of the ultrasonic transducer
(amount depends on extent of deposits). Then place it in water for 10–15 minutes.
• Clean with a soft brush or sponge to remove the deposits.
• Rinse twice in clean water.
• Do not clean the ultrasonic transducer with tools that could damage its surface
(metal or other hard objects).
INSIDE OF WATER TANK
• Clean the inside of the water tank and the mist nozzle at least twice each week if
you use the unit frequently.
• Wipe off any deposits from the inside of the water tank using a soft cloth.
• More stubborn deposits can be rubbed off gently using a soft cleaning sponge.
• Do not use detergents that contain acid, alkali or bleach to clean the water tank.
OUTSIDE OF WATER TANK
• Clean with a cleaning sponge and dry with a soft cloth.
• If necessary the mist nozzle can be removed for cleaning.
• Do not pour water directly into the mist nozzle after you have cleaned the inside.
AIR FILTER
We recommend that you replace the air filter once or twice each year, depending
on the local environmental conditions. Press the filter cover to release it. Remove
the old filter and fit the replacement. Place the old filter in a bag and seal it to avoid
spreading dirt.
LONG-TERM STORAGE
• Pour all the water out of the tank, clean the tank and then dry the unit.
• Make sure that all water has been removed from the unit before storing it.
