76
English
Sleep Timer [SLP]
If this function is enabled, the system shuts down to standby mode after a specified time. You can select 15, 30, 45 or 60 Minutes. If the value OFF is
selected, the function is disabled. To adjust the turn-off time, please follow the next steps:
1
To enter the menu, press the "M" button.
2
Use the
" "
or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button.
2
Select the menu Sleep Timer [SLP] and press the "OK" button to confirm.
3
Press OK and select the desired time using the + or – keys.
Note:
The Sleep Timer will be disabled automatically after a power down. That means the turn-off time must be selected after every power up sequence.
IR Menu [IRM]
This menu includes all functions relevant for the infrared operation of the speaker. It consists of three submenus.
IR Learn [IRL]
The system can learn the infrared codes of your TV remote control and therefore allows you to control the functions of the BRA 3 / VRA 3 and your
TV via one remote control. You can allocate any key of the TV remote control to the BRA 3 / VRA 3. When choosing a key, make sure that the inst-
ructions for the BRA 3 / VRA 3 do not conflict with the TV. We recommend that you deactivate the internal loudspeakers of the TV once the BRA 3 /
VRA 3 is connected. Then you can use the volume keys for the BRA 3 / VRA 3.
To learn the IR codes of a third party remote, hold the TV remote control in position and do the following steps:
1
To enter the menu, press the "M" button.
2
Use the
" "
or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button.
3
Select the IR Menu [IRM] and press the "OK" button to confirm.
4
Choose the function IR Learn [IRL] and press the "OK" button to confirm.
5
IRL is flashing in the display. On the screen "Press the key you want to learn" is displayed.
6
Press the wanted function on the Canton remote control e.g. “+” for .
7
Now the display shows the chosen function, e.g. “V+”.
8
Within 15 seconds, press the key you wish to allocate to this function on the TV remote.
9
Once the IR command has been successfully allocated, the display shows [OK] resp. the OSD shows "Success" and you can continue with
the programming of the next key function, e.g. “Volume –“.
