3
49
English
Note:
•
To delete a playlist and/or the settings from a preset button, please press
and hold the relating button for 10 seconds until the corresponding preset
[P1], [P2] or [P3] is shown in the display rapidly flashing.
AUTOMATIC UPDATES
After you have connected the Smart Connect 5.1 to the network, firmware
updates are executed automatically. After each connection to the power
supply and at regular intervals (also in standby mode), the Connect 5.1
searches for an update and installs this, if available. The LED flashes green/red
during the update and the display first shows „DOWNLOADING“, then
„UPDATING“. During this time the Smart Connect 5.1 is not operable.
To do this, the Smart Connect 5.1 must have been connected to the network
router via the Google Home app or an iOS device (by use of WLAN) or
alternatively by a network cable (by use of LAN).
Attention:
•
Do NOT disconnect the Smart Connect 5.1 from the power supply during
an update process!
Note:
•
The Connect 5.1 contains a multitude of other great functions. All settings
can be found in the detailed instruction manual. This can be found under:
www.canton.de/manual/connect5.1
