Cantel ENDODRY, Руководство по обслуживанию, Страница: 8 / 28

page 8 of
28
2.5.2.1 Deactivate key lock

Press min. 2 seconds

is displayed and indicates.

Press

is displayed for ca. 1 second.

Now button lock is deactivated, current pressure is displayed
2.5.2.2 Adjust sensitivity

Press min. 2 seconds

Changing to settingsmode (F01)

Press

F02 (sensitivity)

Press

With and adjust sensitivity to

Press

switch between and

Press min. 2 seconds

leave settingsmode
2.5.2.3 Activate key lock

Press min. 2 seconds

is displayed and indicates.

Press

is displayed for ca. 1 second.

Now key lock is activated, current pressure is displayed
2.5.3 Pressure controller
The pressure controller monitors the set minimum and maximum pressures (see 2.5.1). If the pressure
exceeds or falls below the set pressures, the current pressure is displayed in red on the pressure
control’s display. In addition, a signal is sent to the control system, which indicates the error on the
touch display. Pressure values within the specified range will be displayed in green.
Caution!
Attention should be paid to operation manual of the pressure controller.
Pressure controller