Cansec Canlan M200 Скачать руководство пользователя страница 2

Страница: 2 / 6

CanLan M200

Page 2 of 6

Quick Start Guide

April 2014 • Rev. 1.3

Connect

Install the USB driver from the included CD. The driver and the configuration
software may also be downloaded from www.cansec.com/downloads.

Install and run the Canlan M200 configuration software.

Connect the Canlan M200 to your PC using the USB cable provided.

NOTE

: T

he cross-over network cable provided may be used instead of the USB cable.

Refer to the Canlan M200 Installation Manual for important connection information.

Verify the COM port number used by the Canlan M200 by going to:

Control Panel > System >Hardware > Device Manager->Port

. Example “USB

Serial Port (COM4)”.

From the Canlan M200 configuration software, click the

Connect

button.

Содержание Canlan M200

Страница 1: ...Cutting edge simplicity Canlan M200 QUICK START GUIDE April 2014 ...

Страница 3: ...CanLan M200 Page 3 of 6 Quick Start Guide April 2014 Rev 1 3 6 Select Connect via Serial Port and choose the appropriate COM port from the drop down menu ...

Страница 4: ...M200 using the AC DC adaptor provided If the Canlan M200 is already powered on use a pin to press and release the reset button in the reset pin hole 8 Press OK within 20 seconds You should see the message Unit Online along with all default configuration parameters Device Reset Button ...

Страница 5: ...ine 1 Make sure you are using the right COM port number 2 Unplug the AC DC adaptor and plug it back in again or use a pin to press and release the reset button if it s already powered on 3 Wait for the Cfg Err LED to come on then click the Connect button to retry the connection 4 For more troubleshooting tips see the Canlan M200 Installation Manual ...