CANOPY US LED CNP-1-50 Series Скачать руководство пользователя страница 3

Страница: 3 / 4

INSTALLATION GUIDE

CNP-1-50

Page 3

Updated 09.21.12

#44-000017

4. Route wires through center of mounting plate assembly. See Figure 5.

5. Take wire harness assembly and make power connections using approved electrical connector. Connect Red

wire to Red wire and Blue wire to Blue wire. See Figure 6.

INSTALLATION INSTRUCTIONS

FIG 5

FIG 6

FIG 7

FIG 8

6. Pack excess wire in center of mounting plate assembly and mount cover using #10 sealing weather resistant

screws supplied. See Figure 7.

7. Complete installation by swinging fixture into place and securing with mounting screws using #2 Phillips driver.

See Figure 8.

Содержание US LED CNP-1-50 Series

Страница 1: ...in Canada Disconnect power before installing the product or servicing it Wait until fixture has cooled down before installing or servicing the fixture MIN 90 C SUPPLY CONDUCTORS WARNING l l l l l MODE...

Страница 2: ...ver assembly to fit 2 Install mounting plate assembly by folding mounting tabs in insert mounting plate into 4 hole and secure by tightening mounting tab screws using 2 Phillips screw driver See Figur...

Страница 3: ...ssembly and make power connections using approved electrical connector Connect Red wire to Red wire and Blue wire to Blue wire See Figure 6 INSTALLATION INSTRUCTIONS FIG 5 FIG 6 FIG 7 FIG 8 6 Pack exc...

Страница 4: ...etal screws supplied Insure location allows wire harness to reach low voltage side of power supply box See Figure 10 4 Make internal primary side high voltage power connections by connecting wires Bla...