– 13 –
With the advanced functions described in this section, the encode bit rate can be
changed or encoding can be performed with a full resolution of 1920
×
1080. Please
be aware of the following information when using these functions.
Changing the encode bit rate
Change the bit rate with the DIP switches on the rear panel of the ADVC-HDM1.
Set the DIP switches to match the bit rate that you want for encoding.
Encoding with full resolution
When 1080/59.94i is input as the video signal format, encoding is performed at a
full horizontal resolution of 1920.
2-2
Advanced Functions
When not using the
advanced functions
(default)
When using the
advanced functions
Output stream
HDV (HD1/HD2)
MPEG2-TS
Time code
Can be used
Cannot be used
Recording to an HDV
deck
Can be recorded
Cannot be recorded
Display on an HDV
camera
Can be displayed
Cannot be displayed
SW5 OFF
SW5 ON
Resolution
Encodes at
1440
×
1080
Encodes at
1920
×
1080
ADVC_HDM1_EN.book Page 13 Tuesday, December 19, 2006 9:20 AM
