39
E
Using the Full
Rang
e of Features
To prevent interference from other
Canon wireless controllers being used
nearby, there are two remote sensor
modes and an off setting. The wireless
controller and the camera have to be set
to the same mode in order to be
compatible.
Setting the remote sensor mode
To turn the remote sensor off:
1. Open either the camera or the VCR menu and select WL. REMOTE.
2. Choose
OFF
B
and close the menu.
•
B
appears in the display.
To change the mode...
...on the camera:
1. Open either the camera or the VCR menu and select WL. REMOTE.
2. Choose
A
1
or
A
2
and close the menu.
• The selected mode will appear on the display for four seconds.
...on the wireless controller:
Press and hold the REMOTE SET button on the wireless controller.
Simultaneously press the ZOOM W button for mode 1 or the
ZOOM T button for mode 2. Continue to press simultaneously for
over two seconds.
• Be sure to set the wireless controller to the same mode as the camera.
A
1
: Mode 1
A
2
: Mode 2
OFF
B
: Sensor off
WL.REMOTE••• 1
(
35, 36)
The wireless controller and the camera have been preset to mode 1. If you change
the mode on the camera, be sure to change the mode on the wireless controller to
the same mode.
REMOTE SET
ZOOM
W
T
3_ZR10_E(34-72) 3/9/00 7:56 PM Page 39 (1,1)
