Additional
Information
71
E
Miscellaneous
Cause and/or what to do about it
• The remote sensor is turned off
(p. 31).
• The batteries are dead or not inserted.
• External interference may cause the
camera’s microprocessor to
malfunction temporarily. If random
letters appear in the display or if
normal operation is interrupted,
remove and then replace the power
source.
• If the camera still does not operate
properly, press the RESET button (on
the camera body behind the LCD
panel) using the tip of a ball point pen
(or similar): camera functions return
to their default setting.
• Remove the cable and then reconnect
it or turn the power off and back on
again.
• This is not a malfunction.
• The back-up battery needs recharging
(p. 62).
• During playback, the recording zone
has been set to a different location to
the base zone.
Problem
?
The wireless controller doesn’t
work.
?
The camera malfunctions.
?
The DV cable is connected
correctly, but there’s nothing in
the display.
?
The camera becomes warm
during use.
?
The camera doesn’t display the
correct date and time.
