Canon Z5000, Руководство по настройке

Страница: 30 / 168

2
2-4 Preparing for ColorPASS Setup
Fiery WebTools
The ColorPASS can support Internet or intranet access with Fiery WebTools from
Windows computers. To enable use of Fiery WebTools, you must do the following in
Setup:
• Enable TCP/IP.
• Set an IP address, subnet mask, and gateway address for the ColorPASS.
• Enable Web Services.
Instead of manually assigning the IP address, subnet mask, and gateway address, you
can use DHCP, RARP, or BOOTP protocols to assign some or all of these addresses
(see page 3-15).
Passwords can be set to control access to Fiery WebTools features. If you do not
specifically set these passwords, all users have access to all Fiery WebTools functions
(see page 2-3).
Fiery WebTools include Status, WebSpooler, WebLink, and Installer.
Status
The Status WebTool provides you with current information on the jobs processing and
printing on the ColorPASS. It is not affected by any password setting. For more
information, see the Printing Guide.
WebSpooler
The WebSpooler interface is very similar to that of the Command WorkStation. It
allows remote users to preview, manipulate, reorder, reprint, and delete jobs currently
spooling, processing, or printing on the ColorPASS. It also allows the administrator to
use the DocBuilder tool (Thumbnails A and B) and to view, print, or delete the
Job Log.
Fiery WebSpooler access can be controlled by setting an Operator password in Setup.
If you set a password, only users with that password can manipulate jobs from
Fiery WebSpooler. A user who does not have the password can still log in to
Fiery WebSpooler as a Guest with view-only access (see page 2-3). For more
information, see the Job Management Guide.