Canon XF305, Инструкция по эксплуатации

Страница: 140 / 213

Playback
140
5
Playback
Adjusting the Volume
During playback, audio will come from the monaural built-in speaker or
headphones. When you connect headphones to the
W
(headphone)
terminal, the built-in speaker will be muted.
Adjusting the Headphone Volume
Press the HEA/- buttons to adjust the volume.
Adjusting the Built-in Speaker Volume
1 Open the [Speaker Volume] submenu.
[
m
Audio Setup] [Audio Output] [Speaker Volume]
2 Select the desired level and then press SET.
• Select [Off] to mute the audio.
NOTES
• For details on changing the audio channel, refer to Selecting the Audio
Channel (
0
157).
Adding Shot Marks during Playback
You can add an
c
mark,
d
mark or both marks to a clip during playback
or playback pause. You can add either mark using assignable buttons or
an
c
mark using the wireless controller’s SHOT1 button.
1 Set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2]
(
0
117).
2 During playback or playback pause, press the assignable button
at the point in the clip to add the shot mark.
• A message indicating the shot mark appears on the screen and the
shot mark is added to the clip.
• Adding a shot mark to a clip during playback will pause the playback.
• Up to 100 shot marks (
c
and
d
marks combined) can be added to
a single clip.
• There may be up to a 0.5 second delay from when you press the
button to when the camcorder adds the shot mark.
[
m
Audio Setup]
[Audio Output]
[Speaker Volume]
[8]
COP
Y