background image

191

Menu Description

Men

u

 Gu
ide

Men

u

 De
scr
iption

Detailed IPv4 
address settings

Configure details of the projector’s wireless LAN (IPv4) function.

Menu

Function

Submenu

Function

IP address

IP address of the projector’s wireless LAN (IPv4).

Subnet mask Subnet mask of the projector’s wireless LAN (IPv4).
Gateway 
address

Gateway address of the projector’s wireless LAN 
(IPv4).

DHCP

Enable or disable wireless DHCP on the projector.

TCP/IP 
settings

Configure the projector’s wireless TCP/IP settings.

Option

Function

Off

Disables the DHCP function. TCP/IP 
settings can be configured manually.

On

Enables the DHCP function. 
Searches the DHCP server. It will no 
longer be possible to enter TCP/IP 
manual settings (IP address, subnet 
mask, and gateway address), 
because the IP address is acquired 
from the DHCP server.

• This menu is not available (grayed out) 

when [DHCP] is [On].

• If an invalid value is entered, “Invalid entry.” 

is displayed. In this case, enter a valid 
value.

Содержание WUX5800Z

















































































































































































































































Отзывы: