WUX500ST
User Commands
-46-
FINE_GAMMA_R
Fine gamma (R)
Format
Setting
Command
FINE_GAMMA_R=<Fine gamma (R) adjustment point 1 adjustment
value:Number>,<Fine gamma (R) adjustment point 2 adjustment
value:Number>,
・・・
,<Fine gamma (R) adjustment point n
adjustment value:Number>
Response
i:OK
Reference
Command
GET=FINE_GAMMA_R
Response
g: FINE_GAMMA_R=<Fine gamma (R) adjustment point 1 adjustment
value:Number>,<Fine gamma (R) adjustment point 2 adjustment
value:Number>,
・・・
,<Fine gamma (R) adjustment point n
adjustment value:Number>
Note: See "Error list" for any response other than the above.
Adjustment values for
<
Fine gamma (R) adjustment point n adjustment value:Number> are 0 to 1024.
Environment
Power mode restriction
Input
LAN
WiFi
RS-232C
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB
No
signal
No No No No Yes No No No No Yes No No Yes
Yes
Yes
Yes
Yes
Yes Yes Yes
Yes
Remarks
(1) This sets the currently selected input signal and image mode.
(2) In the projector menu, the difference between adjustment point 1 and adjustment point 9 is
controlled so that it is 128 or greater, but this limitation does not apply to settings specified from
user commands.
Example
(Setting)
> FINE_GAMMA_R=0,128,256,384,512,640,768,896,1024
< i:OK
(Reference)
> GET=FINE_GAMMA_R
< g:FINE_GAMMA_R=9:0,128,256,384,512,640,768,896,1024
Note: '>' indicates a command; '<' indicates a response.
