Canon WFT-E8, Инструкция по эксплуатации

Страница: 49 / 152

49
Batch Transfer
4
Select images to transfer.

Turn the <
5
> dial to select the
image to be transferred, then press
<
0
>.

Turn the <
5
> dial to display the [ X ]
on the screen’s upper left, then press
<
0
>.

If you press the <
u
> button and turn
the <
6
> dial counterclockwise, you
can select an image from a three-
image display. To return to the single-
image display, turn the <
6
> dial
clockwise.

To select other images to be
transferred, repeat step 4.
5
Transfer the image.

Select [ FTP transfer ], then press
<
0
>.

Select [ OK ] on the confirmation
dialog to transfer the image.

Images selected with [ Sel.
n
] and
[ All image ] can also be transferred in
this way.
If you set the Live View shooting/Movie shooting switch to <
k
> during the
image transfer of captured images, the image transfer will be temporarily
cancelled. Set it to <
A
> to resume the image transfer.

You can also transfer shot movies. However, when the Live View
shooting/Movie shooting switch is set to <
k
>, images cannot be
transferred. Set it to <
A
> and transfer them.

Up to 9,999 images can be selected in one batch.

When [ Sel.Image ] is selected, you can check the transfer history on the
upper left of the screen: No mark: Not selected. X : Selected for transfer.
l
: Transfer failed.
k
: Transfer succeeded.

The procedures for [ RAW+JPEG transfer ] (p.51) and above steps 1 to 4
can also be performed even while the camera is not connected to an
FTP server.