Canon WFT-E6, Руководство по эксплуатации

Страница: 30 / 37

30
Check this section if you encounter problems connecting to the Wi-Fi network or accessing the
camera remotely from a Wi-Fi enabled device. If the problem persists, consult a Canon Service
Center (listed on the back cover of the camera’s Instruction Manual).
Check This First
X Are the wireless router (access point), the camera and the computer or other Wi-Fi
enabled device all turned on?
X Is the transmitter correctly attached to the camera’s system extension terminal?
X Is the Wi-Fi network working and correctly configured?
X Is the computer or other Wi-Fi enabled device correctly connected to the same Wi-Fi
network as the camera?
X Are there any obstructions between the camera and the wireless router or between the
computer/Wi-Fi device used and the wireless router that could be weakening the wireless
signal?
Cannot connect with an access point.
X Password information is not saved with the camera settings. When you load camera
settings from an SD card onto the camera, all the encryption keys and passwords in the
network-related settings are reset. Edit the network-related settings as necessary (
A
5).
X
The wireless signal is not strong enough or there are other devices in the vicinity
interfering with the wireless signal. Refer to
Precautions Regarding Wi-Fi Networks
(
A
31).
Cannot establish a Camera Access Point connection with a Wi-Fi-enabled device.
X When you reset all the camera’s settings, all network settings are lost as well. Use the
default network settings or set up the Camera Access Point settings again (
A
9).
X
The wireless signal is not strong enough or there are other devices in the vicinity
interfering with the wireless signal. Refer to
Precautions Regarding Wi-Fi Networks
(
A
31).
The Browser Remote application will not start on the Web browser.
X Make sure to activate the function on the camera with the [System Setup]
>
[Network
Settings]
>
[Browser Remote]
>
[Activate] setting (
A
24).
X
The URL entered into the Web browser’s address bar is incorrect. Check that you
entered the URL exactly as it appeared on the screen (
A
24
).
The Browser Remote screen is not displayed correctly on the Web browser.
X The device, operating system or Web browser used may not be supported. For the latest
information about supported systems, visit your local Canon Web site.
X Enable JavaScript and cookies in your Web browser’s settings. For details, refer to the
help modules or online documentation of the Web browser used.
Troubleshooting