Canon WFT-E6, Руководство по эксплуатации

Страница: 12 / 37

12
Wi-Fi Protected Setup (WPS) is the easiest way to connect to a Wi-Fi access point. You can do
so simply by pushing a button (if the access point (wireless router) you want to connect to has a
WPS button) or using a PIN code issued by the camera.
1
Press and hold the WPS button on the
wireless router.
The length of time required to hold down the WPS
button depends on the wireless router. Refer to the
instruction manual of your wireless router and
make sure the wireless router’s WPS function is
activated.
2
Within 2 minutes, press SET on the
camera.
While [Connecting] appears on the screen, you
can press SET or the CANCEL button to cancel
the operation.
After the connection is correctly established,
continue with the procedure to configure the IP
address assignment (
A
16).
Wi-Fi Protected Setup (WPS)
Wireless Routers with a WPS Button