Video
49
1 With the camcorder on and in a recording mode, close the LCD
panel.
A beep will sound and the green ON/OFF (CHG) indicator will change
to orange to indicate the camcorder entered standby mode.
2 When you wish to resume recording, open the LCD panel.
The ON/OFF (CHG) indicator turns back green and the camcorder is
ready to record.
IMPORTANT
• Do not disconnect the power source during standby mode (while the
ON/OFF (CHG) indicator is lit in orange).
NOTES
• The camcorder will not enter standby mode if the LCD panel is closed
while the ACCESS indicator is on or flashing or while a menu is being
displayed. The camcorder may also not enter standby mode if the LCD
panel is closed while the memory card slot cover is open or when the
battery charge is too low. Check that the ON/OFF (CHG) indicator
changes to orange.
• The camcorder will shut off if left in standby mode for 10 minutes,
regardless of the
[Power Saving Mode] setting. Press
to
turn on the camcorder.
• You can select the length of time until shut-off or turn off the Quick Start
function altogether with the
[Quick Start] setting.
• Changing the position of the camera mode dial while the camcorder is
in standby mode will reactivate the camcorder in the operating mode
selected.
POWER
CO
PY