Canon VIXIA HF R30, Быстрое руководство

Страница: 88 / 283

48 Š
AUTO Mode
IMPORTANT
• To protect the lens, keep the lens cover closed when you are not
recording movies and when you are not using the camcorder.
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss or damage
to the memory.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• Be sure to save your recordings regularly (
A
128), especially after
making important recordings. Canon shall not be liable for any loss or
corruption of data.
• Recordings on an Eye-Fi card will be uploaded automatically after set-
ting the camcorder to playback mode, if you are within the range of a
configured network. Always verify that Eye-Fi cards have been
approved in the country/region of use. See also
Using an Eye-Fi card
(
A
146).
NOTES
• About the power saving mode: If
q >
[Power Saving Mode]
>
[Auto
Power Off] is set to [
i
On], the camcorder will shut off automatically
to save power when it is powered by a battery pack and is left without
any operation for 5 minutes. Press
P
to turn on the camcorder.
Intelligent IS
Intelligent IS allows the camcorder to select the best image stabilization option
based on your shooting method. The Intelligent IS icon will change to one of the
following icons. In
and modes, you can set the image stabilization
manually (
A
97).
* You can turn off Powered IS through the [ Main Functions] panel (
A
98).
Shooting method Icon
Most general situations; Zooming out (zooming toward
T
); Following subjects at a distance moving left or right
Ä
(Dynamic IS)
Zooming in (zooming toward
S
)
È
(Powered IS)*
Close-up of a subject (Macro IS)
Remaining stationary, such as when using a tripod (Tripod mode)