Canon VIXIA HF R30, Быстрое руководство

Страница: 138 / 283

98 Š
Video
NOTES
• If the degree of camcorder shake is too high, the image stabilizer may
not be able to fully compensate.
• [ Dynamic] is available only when [Zoom Type] is set to
[ Optical].
• For surveying and following shots, when you pan the camcorder from
side to side or tilt it up and down, we recommend setting the IS mode
to [
Dynamic] or [ Standard].
Pre-Recording
The camcorder will start recording 3 seconds before you press
Y
, ensuring you do not miss important shooting opportuni-
ties. This is especially useful when it is difficult to predict when to start
recording.
Operating modes:
1 Activate the pre-recording function.
•
z
will appear on the screen.
• Repeat, selecting [OFF], to turn off pre-recording.
Powered IS
You can use Powered IS to make the image stabilization even more
powerful. Powered IS is most effective when you are stationary and
zooming in on far subjects using high zoom ratios (the more you
approach the telephoto end). Holding the LCD panel with your left
hand will add to the stability of the shot.
• By default, the custom control button (
A
180) is set to
[
È
Powered IS].
[FUNC.]
>
[
È
Powered IS]
>
[ON]
>
[
X
]
[FUNC.]
>
[
z
Pre REC]
>
[ON]
>
[
X
]