13
Basic Operation
E
Installing the backup battery
You need to install the backup battery so the
camera can remember the date and time. Its
memory is powered by a CR2025 lithium battery
with a life span of about a year.
WARNING!
The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge,
disassemble, heat above 212°F (100°C) or incinerate. Replace the battery with a Sony, Sanyo or
Panasonic CR2025, or Duracell DL2025. Use of another battery may present a risk of fire or explosion.
Cautions:
• Do not pick up the battery using tweezers or other metal tools — this will cause a short circuit.
• Wipe the battery with a clean, dry cloth to ensure proper contact.
• Keep the backup battery out of reach of children — if it is swallowed, contact a physician immediately, as
the battery case may break down and the battery fluids damage the stomach and intestines.
• Do not disassemble, heat, or immerse the battery in water, to avoid the risk of explosion.
1. Open the cover of the backup battery compartment.
2. Place the new battery in the compartment with the + side facing outwards.
3. Click the cover back into place.
4. Reset the date and time.
• See p. 26.
