Canon UJ122x8.2B AF, Руководство по эксплуатации

Страница: 21 / 22

BT1-D005-A-ENG ©2022.04 CANON INC. 19/20
Support - <Support> - <Demand>
7. Displaying information about connected demands
Support screen
I G : 5 0
<Support>
Interface:
SerialNo.
LensModelNo.
× 7
I G : 5 0
<Support>
SMJ-F:
Demand
---
Func
Demand screen
I G : 5 0
<Demand>
Right
Left
or × 2
I G : 5 0
<Demand>
Right
Left
To check details on the
demand connected at
right, as viewed from
the lens mount
To check details on the
demand connected at
left, as viewed from the
lens mount
I G : 5 0
<Demand R>
Response:
VF:
FrameSize:
1000
All
M
Norm Direction:
F-Curve: STD
Mode: Full-time
Firmware
①
②
③
④
⑤
⑥
⑦
<DemandR> screen
Example of display
when connected to
compatible demands
Display
item
Table at right*
Status Check is
unavailable
Non-Connected
Status Compatible demand
connected
Demand with
unsupported
functions
connected
No demand
connected
*Items in the table at right are shown when connected to compatible demands.
① Response: Shows the input value of the AF response adjusting knob
Display item MIN 002–999 MAX
Status
When turned fully
counterclockwise
Varies by knob
position
When turned fully
clockwise
②
VF: Shows the status of the VF display selection switch
Display item ALL STATUS OFF
Status
Shows the AF
frame and the
focus status
Shows the focus
status
Does not show the
AF frame or focus
status
③ FrameSize: Shows the input value of the AF frame size adjusting knob
Display item S M L
Status
Small AF frame
size
Medium AF frame
size
Large AF frame
size
④
Direction: Shows the status of the reverse switch
Display item NORM REV
Status
Status when set to focus
on farther subjects if turned
clockwise as viewed from
the operation knob side
Status when set to focus
on farther subjects if turned
counterclockwise as viewed
from the operation knob side
⑤
F-Curve: Shows the status of the focus characteristics curve
selector switch
Display item STD FAR NEAR
Status See “6.1 Focus demand curve characteristics”
⑥ Mode: Shows the status of the AF mode selection switch
Display item Full-time Part-time OFF
Status Full-time AF mode
AF mode while the
AF Active/Hold
switch is pressed
AF is off
⑦ Firmware
Goes to the Firmware screen
Display item Demand firmware information
Support - <Support> - <Firmware>
4. Displaying firmware information
Support screen
I G : 5 0
<Support>
Interface:
SerialNo.
LensModelNo.
× 4
I G : 5 0
<Support>
SMJ-Z: ---
LensModelNo.
Firmware
Firmware
screen
I G : 5 0
<Firmware>
1234.01.01
1234.01.01
1234.01.01
Display item Lens firmware information
Note
The version number shown varies depending on the current firmware. The number of
lines listed also varies, depending on the products used.
Support