Canon Speedlite EL-5, Руководство для продвинутых пользователей

Страница: 159 / 192

P.Fn-04: (FE memory)
You can select whether to update, based on ETTL flash output, the flash output maintained
in manual mode.
0: OFF
1: ON
2: ON /
Note
Setting P.Fn-04 to [2] limits the modes available to < > and < > when
you press the joystick down and select < >. To select another mode, push
the joystick straight in to display the setting screen, press it vertically or horizontally
or turn <
> to select an item, then select the mode.
P.Fn-05: (Beeping)
You can enable beeping after the Speedlite is fully charged.
0: ON
In normal shooting (on-camera flash photography), the Speedlite beeps after it is fully
charged.
With the Speedlite set as a sender in radio transmission wireless flash photography, the
sender beeps after all Speedlites (senders and receivers) are fully charged. Sender
beeping enables you to confirm recharging of the entire wireless system. On receivers,
P.Fn-05 can be set to [0] or [1]. With Speedlites set as wireless receivers in linked
shooting (
), each Speedlite set to [0] beeps after it is fully charged.
1: OFF
The Speedlite does not beep.
Caution
Also when set to [0], the Speedlite beeps if high flash head or battery temperature
has restricted firing (
).
159