Canon Speedlite EL-5, Руководство для продвинутых пользователей

Страница: 134 / 192

5.
Before shooting, confirm that flash recharging is finished.
When < > is displayed, you can determine which firing groups
are not fully charged from the icons. For example, the icon shown in (1)
indicates that firing group <
> is fully charged.
< > is no longer displayed after all groups are fully charged.
For other details on checking recharge status, see step 7 in Autoflash
with One Receiver .
Each receiver fires at the same time in the flash mode you have set.
Caution
For < > flash mode, make sure the receivers support auto external flash
metering. Receivers will not fire unless it is supported.
In <
> or < > flash mode, exposure is controlled to obtain
standard exposure for the main subject as if using a single group, which may cause
overexposure if multiple firing groups are pointing toward the main subject.
Note
For details on < >, refer to the instruction manual of Speedlites that
support auto external flash metering.
Letters of groups that fire do not need to be in consecutive alphabetical order; for
example, A, C, E can be set.
Set any group you do not wish to fire to <
> when configuring flash modes in
step 4. Similarly, modeling lamps of groups set to < > are not lit when the
sender < > button is pressed.
134