Canon SPEEDLITE 220EX, Инструкция по эксплуатации

Страница: 9 / 50

8
1 Turn on the power switch.
Set the power switch to < K >. The
flash will then start recycling.
X
The <
a
> lamp will light.
2 Check that the flash is ready.
When the flash is ready, the
<
J
> lamp will light.
To fire a test flash, press the test firing
button (pilot lamp).
To save battery power, the power will turn off automatically after 90 sec.
of idle use. To turn on the Speedlite again, press the camera’s shutter
button halfway.
Turn on the Power Switch
About Auto Power Off
A test flash cannot be fired while the camera’s operation timer
4
or
0
is
active.
220EX_E.fm Page 8 Thursday, December 15, 2005 11:28 AM
COP
Y