Canon SmartBase PC1200s, Руководство по обслуживанию

Страница: 295 / 400

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
7-13
CHAPTER 7 TROUBLESHOOTING
1.3.4.3 Original Speed Adjustment
Adjust the speed at which originals are moved for ADF mode as follows:
1) Make a copy of the test sheet in ADF mode on paper of the same size in Direct. (See
1.2.2 of Chapter 7.)
2) Measure the length “L” in the middle of the copy output. (It must be 277 ± 1 mm for
A4, 259 ± 1 mm for LTR.)
Copy of the test sheet
L
(feeding direction)
F07-103-06
3) Press the Additional Functions key and the # key to start service mode.
4) Press the Left/Right Arrow key so that ‘#6 SCANNER’ is indicated.
5) Press the OK key.
6) Press the Left/Right Arrow key so that ‘7: CCD’ is indicated.
7) Press the OK key.
8) Press the Left/Right Arrow key so that the 2nd row of the LCD indicates ‘034:’.
9) Enter a appropriate correction value using the Left/Right Arrow key so that the length of
L measured in step 2) is as indicated. (An increase by ‘1’ will increase the length of L
by about 0.5 mm.)
10) Press the OK key.
11) Press the Stop key (to end SCANNER).
12) Make a copy of the test sheet in ADF mode on paper of the same size in Direct; then,
check to make sure that the length of L of the copy is as indicated.
13) End the work if the length of L is as indicated; otherwise, start over with step 2).