manualshive.com logo in svg

Canon SmartBase 1210D, Руководство по обслуживанию, Страница: 330 / 406

Поделиться
Скачать
Canon SmartBase 1210D Скачать руководство пользователя страница 330

COPYRIGHT © 2002 CANON INC. 

2000 2000 2000 2000

 CANON SmartBase PC1210D/1230D/1270D REV. 1 MAR. 2002

CHAPTER 7 TROUBLESHOOTING

7-42

4.2.3 The contact sensor fails to move.

Contact sensor, Spacer of contact sensor

1) Are the contact sensor and the spacers of the contact sensor

mounted correctly?

NO:

Mount them correctly.

Contact sensor drive belt

2) Is the contact sensor drive belt normal?

NO:

Replace the contact sensor drive belt.

Contact sensor drive rail

3) Move the contact sensor slowly. Does it move smoothly?

NO:

Check the surface of the contact sensor drive rail for foreign mat-
ter, and remove any foreign matter. If it is soiled, clean it with alco-
hol, and apply a small amount of lubricant.

Connector

4) Is the connection between the connector J310 on the image proces-

sor PCB and the connector of the reader motor normal?

NO:

Correct the connection.

Reader motor, Image processor PCB

5) Try replacing the reader motor. Is the problem corrected?

YES: End.
NO:

Replace the image processor PCB.

4.2.4 The contact sensor LED fails to go ON.

Connector

1) Is the connection of the following sensors normal: J501 and J503 on

the analog processor PCB; J317 on the image processor PCB; J504
on the contact sensors?

NO:

Correct the connection. If the flexible cable has a scratch, replace
it.

Contact sensor

2) Try replacing the contact sensor. Is the problem corrected?

YES: End.

Analog processor PCB, Image processor PCB

3) Try replacing the analog processor PCB. Is the problem corrected?

YES: End.
NO:

Replace the image processor PCB.

Содержание SmartBase 1210D























































































































































































































































































































































































































Отзывы:

Нет отзывов