Canon Smart Dedicated Design BLM300C, Руководство по технической поддержке

Страница: 7 / 36

Canon
BLM300C Professional Booklet Maker Service Support Guide
BLM300C Professional Booklet Maker Service Support Guide July 2014
Revision 2 Page 2
II. Features
A. The BLM300C Professional Booklet Maker

Connects to the High Capacity Stacker-F1

Supports sheet sizes ranging from 5.5” x 9.76” (140 mm x 248 mm) to 12.6”
x 18.5” (320 mm x 470 mm)

Operation adjustment settings are achieved via the Booklet Maker User
Interface (UI)

Includes a two position stapler that can staple up to 30 sheets (80 g/m
2
, 120
pages booklet) (or 6 mm thickness whichever is less). Stapling can be
adjusted relative to the fold for a neat look
B. Optional Modules
1. The Front Trimmer

Prevents an effect called creeping during the paper fold process

Provide a neat finish to booklets up to 25 sheets (80 g/m
2
, 100 pages
booklet) (or 5 mm thickness whichever is less)
2. The 2-Knife Trimmer

This module is used in conjunction with the Front Trimmer to achieve 3-
side trimming

Cuts the top and bottom edges of a booklet to provide a neat finish to
booklets up to 25 sheets (80 g/m
2
, 100 pages booklet) (or 5 mm
thickness whichever is less)

Trim up to 1.38” (35 mm) from the top and bottom of the booklet (up to
2.76” (70 mm) total)

Trim the top and bottom individually (set at different heights) or
asymmetrically based on the desired height of the booklet
3. Square Fold

Provides a professional square back finishing look to booklets similar to
a bound book

Adds a square back to booklets up to 30 sheets (80 g/m
2
, 120 pages
booklet) (or 6 mm thickness whichever is less)

The square-fold finish allows for printing on the spine, further increasing
the booklet’s value to the customer
4. Rotator Transport

Required when producing smaller booklet sizes of A5 paper or 5.5" x
8.5"

This module rotates A4, Letter or SRA4 paper 90º from the Long Edge
Feed to the Short Edge Feed ensuring that the printer runs at maximum
productivity