41
CAUTIONS
WARNINGS
• Do not stick any part of your hand into the printer interior.
• Do not use or store the equipment in the following types of places.
Humid
or
dusty
areas,
places
subject
to
heavy
vibrations,
places
near
flames,
places
subject
to
strong
sunlight,
or
hot
places
such
as
an
automobile
trunk
or
dash-
board.
• Do not attach metallic pins or allow dirt to collect on the power plug or
recharging connectors.
• Do not use the compact power adapter beyond its rated capacity or
voltage. In addition, do not leave the power plug partially or inadequately
inserted into a power outlet.
There
is
a
risk
of
heat
generation
or
explosions.
• Remove the compact power adapter power cord from the power outlet
when not using the equipment.
Leaving
it
plugged
in
for
long
periods
of
time
may
pose
the
risk
of
heat
generation
or
deformation.
• Do not remove the paper cassette from the printer while printing is in
progress.
To Prevent Malfunctions and Damage Caused by Electromagnetic Fields
• Never position the equipment close to motors to other devices that
generate strong electromagnetic fields. Moreover, do not use it near
televisions or AM radios.
To Prevent Condensation
• You can avoid condensation by placing the devices in an airtight, resealable
plastic bag and letting them adjust to temperature changes slowly before
removing them from the bag. In the event that condensation does form
within the equipment, keep it at room temperature until the water
droplets evaporate naturally before using it.
Battery (CP730 Only)
• Do not place the battery pack near a heat source or expose it to direct
flame or heat.
• The battery pack should not be immersed in water.
• Do not attempt to disassemble, alter or apply heat to the battery pack.
• Avoid dropping or subjecting the battery pack to severe impacts that could
damage the casing.
• Use only recommended battery pack and accessories.
There is a risk of the battery exploding or rupturing.
In
the
event
that
a
bat-
tery
leaks
and
the
eyes,
mouth,
skin
or
clothing
contact
these
leaked
substances,
immediately
flush
with
water.
• When you are not using the printer, remove the battery and store it
properly.
• Do not place anything, such as tablecloths, carpets, bedding or cushions, on
top of the battery charger while it is charging.
There
is
a
risk
of
heat
generation
or
deformation
if
it
is
left
connected
for
a
long
period
of
time.
• Before you discard a battery, cover the terminals with tape or other
insulators to prevent direct contact with other objects.
Contact
with
the
metallic
components
of
other
materials
in
waste
containers
may
lead
to
fire
or
explosions.
