![background image](http://html1.mh-extra.com/html/canon/scanfront-220/scanfront-220_software-update_4049703003.webp)
Canon ScanFront 220/220P System Software Update
Instructions
ScanFront Version Up Procedure Version 1.0
Page
3
2. Once the IP address is obtained, launch an Internet Explorer session on a network attached
computer. Type the ScanFront IP address into the Internet Explorer address bar and then
click enter. You will be presented with the ScanFront 220 Web Menu login screen for the
device. Make sure the login screen is in Administrator Mode and not in User Mode.
Switching to Administrator Mode from User Mode can be done by clicking the To
Administrator Mode>> link in the upper right hand corner of the login page. If the upper
right hand corner link says To User Mode>> you are at the Administrator Mode login page
already. At that point you should enter the administrator password, and then click the Login
button;