Part Names
26
Top Control
KEYSTONE button
Corrects keystone distortion. (
)
[ ] [ ]: For keystone adjustment.
Press
D.SHIFT/KEYSTONE
and then
AUTO SET
to adjust the keystone auto-
matically.
• Moves the image up and down when
the D. image shift is selected. (
)
• [ ] [ ]: Adjust the vertical position.
<
<
<
<
MENU button (
Displays a menu on the screen.
AUTO SET button (
)
Performs input signal set-
tings, auto adjustment on fo-
cusing, keystone distortion,
screen color correction, and
so on.
FOCUS button (
)
Adjusts focusing.
[ ] [ ]: For rough adjustment.
[<] [>]: For fine adjustment.
Press
FOCUS
and then
AUTO SET
to adjust the focusing automatically.
<
<
ZOOM button (
)
Adjusts the image size.
[ ] [ ]: For rough adjust-
ment.
[<] [>]: For fine adjustment.
<
<
OK button (
)
Determines the item se-
lected from the menu.
INPUT button (
)
Switches among input signals.
)
Flashes red when a problem has been
detected on the projector.
POWER button/lamp (
,
)
Turns the projector on or off.
Green: The projector is on.
Flashing green: The projector is be-
ing turned on.
Red: The projector can be turned on.
Flashing red: The projector is being
turned off (the lamp is being cooled).
Pointer/VOL button (
Adjusts the sound volume.
[<]: Decreases the volume.
[>]: Increases the volume.
Selects the upper, lower, left or
right item in the menu.
AUTO PC button (
)
Adjusts tracking and so on automatical-
ly in accordance with signal from a
computer when ANALOG PC-1 or ANA-
LOG PC-2 is selected.
LED illumination lamp (
Indicates the projector status with LEDs.
Blinking from the left: The projector is being turned on.
Blinking from the right: The projector is being turned off.
Middle LED flashing slowly: The image is being blanked out.
Left and right LEDs flashing slowly: The image is freezing.
