background image

User Command Specifications

 9. Details of command BRI

1

BRI

BRI

BRI=<Brightness setting: Number>

Brightness setting (-20 to 20)

This sets the screen brightness.

-1

A "busy" response is given while the zoom or focus lens is being driven.

-2

Menu
[Image adjustments] - [Brightness]

[Image adjustments] - [Brightness]

-3
-4

Setting

> BRI=-10

This sets the brightness to -10.

< i:OK

Reference

> GET BRI or ?BRI

This retrieves the brightness.

< g:BRI=-10

Obtain settable parameter range (Min, Max)

> RANGE BRI
< r:BRI=N, -20, 20

Any value from -20 to 20 can be set for the brightness.

* Commands are indicated by ">", and responses are indicated by "<".

Supported Command States

OFF ON

PM

×

×

×

×

* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.

This command is the same as the menu functions in the table below.

The currently selected input signal and image mode are used for these settings.
The current brightness can be acquired using the applicable GET command.

SX50

SX6

SX60

SX6

Example

Brightness setting

The RANGE command can be used to obtain the parameter range that can be set at 
that time.

It can be executed when the projector is in both the 

remote mode

 and 

power-on

 status at the 

same time.

"i:OK" is returned if the parameter was set properly.

Model

Number

X600

Commands

Function

Parameter

Description

Response

Format

SX50

01.00**

01.01**

01.01**

X600

SX60

01.01**

Model

Power 

Input

D-RGB A-RGB1 A-RGB2 Comp

Video S-Video D-Video

Mode

Remote Local

Remarks

SCART

None

SX50

×

SX6

×

SX60

X600

Mode Control Setting Reference

Commands

supported

For details, refer to the RANGE command.

For all other responses, refer to "Error List."

(Refer to the ZCONTDRV command and FCONTDRV command.)

For details, refer to the GET command.

PAGE 29

Содержание RealIS SX6































































































































































































Отзывы: