Canon RE-350 страница 11 Скачать руководство пользователя

Страница: 11 / 63

Send designated commands to the

RE-350

for control.

Set the

RE-350

to [O

-L

INE

] Mode.

In order to put the

RE-350

in [O

-L

INE

]

Mode, the following two methods will be
available:

1. Push the {

RS-232

} button on

the front panel.

2. The

sends the [O

-L

INE

]

command to the

RE-350

Turn off the main power on the

RE-350

The

RE-350

will operate according to the given

commands. (Refer to Section 2.0)

1. The

RE-350

will send Request Off Line event data to

the

and the

RS-232 LED

will blink.

2. After the reception of <Accepted> E-response data, the

RE-350

's status shifts to [O

-L

INE

] mode and the

RS-

232 LED

will turn off. If the

RE-350

receives <Denied>

E-response data, the

RE-350

stays in [O

-L

INE

] Mode

and the

RS-232 LED

remains on.

If the

does not respond in one second with E-

response data, the

RE-350

will repeat Request Off Line

event data up to twice and if still no E-response data,
the

RE-350

stays in [O

-L

INE

] Mode and maintains

RS-

232 LED

on. (Refer to Section 2.5)

The

RE-350

responds with C-response data and it shifts to

-L

INE

] Mode and the

RS-232 LED

turns off.

The main power of the

RE-350

will be off and every

LED

will be off.

rder

RE-350's Condition and LED Status

Operations

Содержание RE-350
































































Результаты поиска

Содержание RE-350

Отзывы:

Похожие инструкции для RE-350

Бренды по названию

Популярные бренды

Canon RE-350, Руководство по командам интерфейса управления

Результаты поиска

Содержание RE-350

Отзывы:

Похожие инструкции для RE-350

Бренды по названию

Популярные бренды