Canon PowerShot SXE40 HS, Начало работы

Страница: 185 / 293

Viewing
149
Washed-out highlights in the image flash on the screen in detailed information
display (p. 148).
z
The graph in detailed information display
(p. 228) is a histogram showing the
distribution of brightness in the image. The
horizontal axis represents the degree of
brightness, and the vertical axis, how much of
the image is at each level of brightness.
Viewing the histogram is a way to check
exposure.
z
To view still image and movie location
information (latitude, longitude, and elevation
recorded when [GPS] was set to [On] (p. 47))
and the shooting date and time, press the
o
button in detailed information display.
Latitude, longitude, elevation, and UTC are
listed from top to bottom.
z
Press the
o
button again to return to detailed
information display.
• Switching display modes by pressing the
l
button is also possible
immediately after you shoot, while your shot is displayed. However, simple
information display is not available. To change the initial display mode, press
the
n
button and choose [Review Info] on the
4
tab (p. 88).
• If you do not want names to display on images shot using Face ID, press the
n
button, choose [Face ID Info] on the
1
tab, and then set [Name Display]
to [Off].
Overexposure Warning (for Image Highlights)
Histogram
Bright
Dark
High
Low
GPS Information Display
SX260 HS
• [---] shown instead of numerical values indicates that the information
was not received from GPS satellites, or that accurate positioning
was not possible.
• UTC: Coordinated Universal Time, essentially the same as Greenwich Mean
Time