Downloaded from www.vandenborre.be
Downloaded from www.vandenborre.be
Downloaded from www.vandenborre.be
3
Remove the cover and insert the
battery.
After aligning the
o
marks on the battery and
charger, insert the battery by pushing it in
(
) and down (
).
Charge the battery.
Once you connect the power cord to the
charger and plug the cord into a power outlet,
the lamp will light up orange.
When charging is finished, the lamp turns
green. Remove the battery.
For details on charging time and the number
of shots or recording time available with a
fully charged battery, refer to “Specifications”
in the
Camera User Guide
.
Open the cover.
Slide the cover (
) and open it (
).
Insert the battery.
While pressing the battery lock in the direction
of the arrow, insert the battery as shown and
push it in until it clicks into the locked position.
To remove the battery, press the battery lock
in the direction of the arrow.
Initial Preparations
Charging the Battery
Inserting the Battery and Memory Card
Battery Lock
Terminals
EC322_323_GS_EN.fm Page 3 Friday, January 13, 2012 2:40 PM
Downloaded from www.vandenborre.be
