Canon PowerShot SD100, Руководство пользователя

Страница: 38 / 191

36
When a shooting setting is changed, information about the settings displays
on the LCD monitor for approximately 6 seconds even if the LCD monitor is
set to Off or to the No Display mode. (It may not display under some
circumstances, depending on the selected settings.)
You may set the flash, continuous mode, self-timer, macro, infinity and
metering mode settings while this information is displayed.
• After you press the shutter button and take a shot, the recorded
image appears on the LCD monitor for 2 to 10 seconds (1-second
increments). It will continue to display if you press the
SET button
while it is shown on the screen. See Changing the Review Duration
(p. 60).
• While a recorded image is displayed on the LCD monitor, you can
check the exposure with the graph (See Histogram Function (p. 39)).
that shows the distribution of the brightness data. If the exposure
requires adjustment, set the exposure compensation and reshoot.
(Press the
DISP. button if the histogram and other information is not
shown)
A slow shutter speed has likely been selected because of insufficient
lighting if the upper indicator beside the viewfinder blinks orange after
the metering preparations are complete and the camera shake icon
displays in the LCD monitor. Set the flash to or , or affix the
camera to a tripod to shoot.
Information Displayed on the LCD Monitor
Shooting Mode