4. Service Mode
Function
Procedure
Remarks
Cleaning the BJ cartridge
Press and hold the RESET button for 2 seconds or more
Cleaning time
( while the AC cord is plugged in)
:Approx.40seconds.
#Can be performed from the printer driver utility.
<For reference>
Deep Cleaning
Select "Deep Cleaning" from the printer driver utility.
Cleaning time
(It is necessary to connect the printer to the PC.)
:Approx.60seconds.
Paper feeding without printing
Click the RESET button three times.
Perform paper feeding from the ASF
(For feeding cleaning sheet through the ASF.)
without printing.
Test print
1)
Nozzle pattern
Double click the RESET button.
Print nozzle check pattern
(while the AC cord is plugged in)
(Line misalignment check
pattern)
<For reference>
[1]
Print Head Alignment
Select "Print Head Alignment" from the printer driver utility.
[2]
Significant misalignment
Select the optimal value using the printed head position
can be adjusted.
adjustment pattern. (It is necessary to connect the printer
to the PC.)
2)
Service test print
Control ROM Version
See *1 service test print
Pages Per Cartridge
Print sample : See *3
Waste ink Amount
Destination setting
EEPROM Reset
See *2 EEPROM reset / Destination setting
(Reset waste ink amount)
Destination setting
See *2 EEPROM reset / Destination setting
(Japan/SP/Others)
*1
Service test print
-1 Without the cartridge installed and with the front cover closed, connect the AC cord
while holding down the RESET button.
-2 Release the RESET button, press it down again within 5 seconds and release it once more.
-3 Open the front cover and install the print head (QY6-0038-000) and set A4-sized paper.
-4 Press the RESET button 3 times in a row.
-5 Close the front cover.
-6 The printer starts service test printing.
*2
EEPROM reset / Destination setting
-1 Without the cartridge installed and with the front cover closed, connect the AC cord
while holding down the RESET button.
-2 Release the RESET button, press it down again within 5 seconds and release it.
-3 Hold down the RESET button for 2 seconds or more and release it once more.
-4 < EEPROM Reset >
< Destination setting >
Hold down the RESET button for 2 secs or more
-Japan
Press the RESET button once.
and release it.
-Others
Press the RESET button twice
-SP
Press the RESET button 3 times
After the button is pressed, the carriage will move
the same number of times as the RESET button was pressed.
*3
Print sample of 'Service test print'
You can check the EEPROM settings with a 'Service test print'. (See the first part of the 'Service test print.')
Control ROM Version
Waste ink Amount
Fed sheet count
Paper type
Destination setting
Other
Other 01
Self print
Japan 02
Glossy paper
SP 03
High resolution paper
Postcard
Plain paper
S200 Destination XX ROMVer X.XX Lost XX.X% CL XXXXX PaperCnt -> Nol XXXX Cad XXXX Res XXXX Gls XXXX Sel XXXX Otr XXXX
PurgeCnt -> Tim yyyyy Dot yyyyy Mnu yyyyy Crg yyyyy Wip yyyyyyk PurgeFlag: yyy Door: close USBSerialNo yyyyyy Fch: yy
