Using an Externally Mounted Flash (Sold Separately)
185
Set [ND Filter] to [On].
●
After pressing the
m
button, press the
op
buttons to choose
, then press the
qr
buttons or use the
Ê
dial to choose
.
Configure the externally mounted
flash.
●
Follow Step 4 on p. 181. to make settings.
Shoot.
●
You can shoot in E-TTL automatic flash
exposure compensation mode by setting
the camera to either
G
,
B
, or
M
modes.
●
When the scene is too bright, set the
aperture values in
B
or
D
, then shoot.
•
Be sure the cords from the Off Camera Shoe Cord, Macro Ring Lite or
Macro Twin Lite do not obstruct or interfere with the flash.
•
While shooting with a tripod, adjust the direction of the camera so that
the flash heads do not contact the tripod or bracket.
•
Depending on the placement of the controller, it may come into contact
with the LCD monitor.
•
Use the screen for shooting. The viewfinder cannot be used.
•
8
mode is not available.
COP
Y